Design Parameter Analysis of Point Absorber WEC via an Evolutionary-Algorithm-Based Dimensioning Tool

Wave energy conversion has an essential difference from other renewable energies since the dependence between the devices design and the energy resource is stronger. Dimensioning is therefore considered a key stage when a design project of Wave Energy Converters (WEC) is undertaken. Location, WEC concept, Power Take-Off (PTO) type, control strategy and hydrodynamic resonance considerations are some of the critical aspects to take into account to achieve a good performance. The paper proposes an automatic dimensioning methodology to be accomplished at the initial design project stages and the following elements are described to carry out the study: an optimization design algorithm, its objective functions and restrictions, a PTO model, as well as a procedure to evaluate the WEC energy production. After that, a parametric analysis is included considering different combinations of the key parameters previously introduced. A variety of study cases are analysed from the point of view of energy production for different design-parameters and all of them are compared with a reference case. Finally, a discussion is presented based on the results obtained, and some recommendations to face the WEC design stage are given

Educational Project for the Teaching of Control of Electric Traction Drives

Electric vehicles constitute a multidisciplinary subject that involves disciplines such as automotive, mechanical, electrical and control engineering. Due to this multidisciplinary technical nature, practical teaching methodologies are of special relevance. Paradoxically, in the past, the training of engineers specializing in this area has lacked the practical component represented by field tests, due to the difficulty of accessing real systems. This paper presents an educational project specifically designed for the teaching and training of engineering students with different backgrounds and experience. The teaching methodology focuses on the topology of electric traction drives and their control. It includes two stages, a simulation computer model and a scaled laboratory workbench that comprises a traction electrical drive coupled to a vehicle emulator. With this equipment, the effectiveness of different traction control strategies can be analyzed from the point of view of energy efficiency, robustness, easiness of implementation and acoustic noise

Passenger Exposure to Magnetic Fields due to the Batteries of an Electric Vehicle

In electric vehicles, passengers sit very close to an electric system of significant power. The high currents achieved in these vehicles mean that the passengers could be exposed to significant magnetic fields. One of the electric devices present in the power train are the batteries. In this paper, a methodology to evaluate the magnetic field created by these batteries is presented. First, the magnetic field generated by a single battery is analyzed using finite elements simulations. Results are compared to laboratory measurements, taken from a real battery, in order to validate the model. After this, the magnetic field created by a complete battery pack is estimated and results are discussed

A Novel Education Proposal: Devising an Electric Power System

The study of electric power systems within the field of Electrical Engineering is usually approached by computer simulation because any actual test is quite complex to be implemented, especially with renewable energies. Having the aim to improve student learning about this topic, a new subject called “Devising an Electric Power System” was organized following a CDIO (Conceive-Design-Implement-Operate) approach. The subject is programmed for one academic year and based entirely on laboratory work. The students are divided into three teams. Every team would have to work on a power system that includes a solar PV generator and a pumping controlled drive, both connected to a three–phase grid. The third and last part of the subject is focused on “electric utility” business strategy. In the final day of the course a competition between the three teams takes place

Devising an Electric Power System: A CDIO Approach Applied to Electrical Engineering

The study of electric power systems within the field of Electrical Engineering is usually approached by computer simulations because any actual test is quite complex to be implemented. Having the aim to improve student learning about this topic, a new subject called “Devising an Electric Power System” was organized following a CDIO (Conceive-Design- Implement-Operate) approach. The subject is programmed for one academic year and based entirely on laboratory work. The students are divided into three groups. Every group would have to work on a device that includes a solar PV generator and a pumping controlled drive, both connected to a three–phase grid. The process followed by the students along the academic year begins with a short theoretical introduction and simulation studies where they conceive and design control strategies. These control strategies are for the solar PV generator (i.e., programing the “Maximum Power Point Tracking” MPPT) as well as for the pumping electric drive (i.e., following a V/f strategy or a vector control). The process is continued by practical implementation of the simulated algorithms previously obtained. In this step, the students implement and operate the systems until they become robust and well adjusted, and ready for the intermediate partial competition among the three groups. During this practical implementation stage, the innovative competence is better enhanced. At the moment that each group has implemented an electric generator and an electric consumption (load), they follow the third and last part of the subject that is focused on “electric utility” business strategy. The students will have to comply with the rules of the electricity market by offering energy packages to be generated and consumed at a certain price. The price and volume of energy to be generated/consumed are determined by the convergence point of supply and demand, as determined by the marginal pricing model. Once the market is cleared, the students have to realize their generation/consumption commitments by operating the real power system they have conceived and implemented. After the first academic year of this subject, the students’ evaluation was highly acceptable. The specific technological contents of the subject were learnt by the method called “learning by doing” that allows students to improve their skills in team building, innovation and communications. In addition, a good work atmosphere among students and teachers has arisen

Analysis of Alternative Frequency Control Schemes for Increasing Renewable Energy Penetration in El Hierro Island Power System

El Hierro, island declared as a biosphere reserve by the UNESCO in 2000, aims to become self-sufficient in energy and 100% free of greenhouse gas emissions. This isolated power system consists of diesel units and a hybrid Wind- Pump Storage Hydropower Plant (W-PSHP), equipped with Variable Speed Wind Turbines (VSWTs), Pelton turbines and a pump station with both fixed- and variable-speed pumps. During last years the annual average renewable energy participation is increasing, especially due to the improvements in the frequency control strategies in PSHP including the operation in short circuit mode. This performance involves an important reduction of the system efficiency but allows PSHP to regulate frequency deviations when available wind power is higher than power demand and the Diesel units are disabled. In this paper different alternative frequency control schemes are proposed so that Pelton units support to the frequency control can be substituted, avoiding energy losses owing to short-circuit operation. This way renewable energy participation would be increased. The control schemes are developed using pumping station regulation capacity, the proper kinetic energy of the VSWTs rotors and a new Flywheel Energy Storage System connected to the grid by means of power electronics. Nine different control cases have been presented, including hydraulic short circuit operating mode. Different simulations have been carried out and they confirm that proposed control schemes fulfil the initial research objectives and enable to improve the global energy efficiency of the system

Analysis of Alternative Frequency Control Schemes for Increasing Renewable Energy Penetration in El Hierro Island Power System

El Hierro, island declared as a biosphere reserve by the UNESCO in 2000, aims to become self-sufficient in energy and 100% free of greenhouse gas emissions. This isolated power system consists of diesel units and a hybrid Wind- Pump Storage Hydropower Plant (W-PSHP), equipped with Variable Speed Wind Turbines (VSWTs), Pelton turbines and a pump station with both fixed- and variable-speed pumps. During last years the annual average renewable energy participation is increasing, especially due to the improvements in the frequency control strategies in PSHP including the operation in short circuit mode. This performance involves an important reduction of the system efficiency but allows PSHP to regulate frequency deviations when available wind power is higher than power demand and the Diesel units are disabled. In this paper different alternative frequency control schemes are proposed so that Pelton units support to the frequency control can be substituted, avoiding energy losses owing to short-circuit operation. This way renewable energy participation would be increased. The control schemes are developed using pumping station regulation capacity, the proper kinetic energy of the VSWTs rotors and a new Flywheel Energy Storage System connected to the grid by means of power electronics. Nine different control cases have been presented, including hydraulic short circuit operating mode. Different simulations have been carried out and they confirm that proposed control schemes fulfil the initial research objectives and enable to improve the global energy efficiency of the system

Approach to Hybrid Energy Storage Systems Dimensioning for Urban Electric Buses Regarding Efficiency and Battery Aging

This paper focuses on Hybrid Energy Storage Systems (HESS), consisting of a combination of batteries and Electric Double Layer Capacitors (EDLC), for electric urban busses. The aim of the paper is to develop a methodology to determine the hybridization percentage that allows the electric bus to work with the highest efficiency while reducing battery aging, depending on the chosen topology, control strategy, and driving cycle. Three power electronic topologies are qualitatively analyzed based on different criteria, with the topology selected as the favorite being analyzed in detail. The whole system under study is comprised of the following elements: a battery pack (LiFePO4 batteries), an EDLC pack, up to two DC-DC converters (depending on the topology), and an equivalent load, which behaves as an electric bus drive (including motion resistances and inertia). Mathematical models for the battery, EDLCs, DC-DC converter, and the vehicle itself are developed for this analysis. The methodology presented in this work, as the main scientific contribution, considers performance variation (energy efficiency and battery aging) and hybridization percentage (ratio between batteries and EDLCs, defined in terms of mass), using a power load profile based on standard driving cycles. The results state that there is a hybridization percentage that increases energy efficiency and reduces battery aging, maximizing the economic benefits of the vehicle, for every combination of topology, type of storage device, control strategy, and driving cycle

Wave Farms Integration in a 100% renewable isolated small power system -frequency stability and grid compliance analysis

The increase in the penetration of variable renewable energies (RE) is having a negative impact on the frequency of electrical grids due to effects such as the reduction of inertia when RE is connected by power electronics systems. In addition, the deterioration of the electrical frequency causes that the frequency containment mechanisms to act more frequently, which increases the wear and tear on the conventional generation plants that supply them. Within variable renewable energies is wave energy, which adds to the variability (or lack of manageability) of other renewable energies (e.g. wind, solar) an oscillatory component that translates into an oscillating power injected in the electrical grid. This power oscillation produces oscillations in electrical frequency that can take an electrical system outside of normal operating limits. The effect of frequency oscillations is magnified in weak electrical grids such as the insular system in which the study of this article is proposed, the island of El Hierro. A specific tool is used to evaluate the electrical frequency of the system, also evaluating the wear and tear of conventional generation plants. The limits in the penetration of the wave generation are analyzed for this specific power system

A Review of Offshore Renewable Energy in South America: Current Status and Future Perspectives

This paper addresses the current status and future research and development perspectives associated with technologies to harness offshore renewable energy, including offshore wind, waves, tides, ocean currents, and thermal and salinity gradient, in South America (SA). It focuses on five countries: Argentina, Brazil, Chile, Colombia and Uruguay. At first, a comprehensive survey presents the number of scientific papers classified based on the resource to show the tendency and importance of such subjects in the academic community. Each country’s electricity matrix and grid connection are shown to understand the region’s renewable source participation situation. The potential of offshore renewable resources is addressed by considering the published technical papers in scientific journals. The main conflicts and synergies associated with ocean space utilization are presented by considering the exclusive economic zone of each country. The status of the regulatory frameworks to promote and development of offshore renewable energies is presented. Two sections are dedicated to presenting the active, decommissioned and planned projects, research groups and laboratory infrastructures to develop the technologies. The last section discusses the future perspectives on the development of this sector in SA. It is observed that SA, with more than 25,000 km of coastline, has a great potential for offshore renewable energy; however, so far, these resources have not been explored commercially. Larger investment in the sector, establishing an adequate legal framework and deploying full-scale demonstration projects at sea are necessary for the commercialization of such technologies in SA